Walls, roofs and attics
Rolls are made for large laying areas, which is why the material is used across wall runs, roof decks and attic surfaces rather than in small cut pieces.
Made for large-area laying, this foil-faced blanket brings thermal control, vibration damping, and sound absorption together in one flexible roll. As a glass wool insulation manufacturer we build each batch from stable glass fiber bonded with thermosetting resins, and as a glass wool insulation supplier we help contractors, HVAC integrators, and facility teams confirm roll width, lap edges, and packing before dispatch.
Three routes reach the same blanket, and each one changes a different part of the order. Use the rows below to decide which answers matter for your project before you compare prices.
| What to check | Manufacturer | Supplier or distributor | Trading company |
|---|---|---|---|
| Order quantity | Ask for the smallest run the production line accepts. | Often works from stocked quantities rather than a production run. | Usually quotes the largest minimum of the three. |
| Lead time | Set by the production schedule, so ask for the date in writing. | Set by the stock on hand. | Depends on a third party, so confirm rather than assume. |
| Width, length and facing | Ask which of these can be changed at the line. | Usually limited to the sizes already stocked. | Ask who confirms the change and who makes it. |
| Defect recourse | Traceable to the batch that was produced. | Traceable to the stock lot that was supplied. | Ask who carries the claim after delivery. |
| Price transparency | Quoted against your specification and quantity. | Quoted against stock and margin. | Ask which specification the price is based on. |
| Who answers the RFQ | The team that runs the line. | The team that holds the stock. | A third party between you and the maker. |
Whichever route you take, put the answers in writing: roll width, facing, lap detail, quantity, packing and the delivery date. The quotation checklist further down this page lists the fields to send.
The product page describes a roll material made for large-area laying, combining heat insulation with vibration damping and sound absorption. These are the applications it names.
Rolls are made for large laying areas, which is why the material is used across wall runs, roof decks and attic surfaces rather than in small cut pieces.
Stated as suitable for integration with ventilation ducts, where the foil facing also works as a radiant barrier and a vapour retarder. Read the duct insulation guide
Foil-faced blankets are chosen for industrial roof build-ups, where roll width and lap detail are matched to the framing before installation. Choosing a blanket for industrial roofs
Listed for acoustic paneling and stated as especially effective for middle and low frequency noise, helping reduce noise pollution and improve the working environment.
Described as suitable for integration with framing, so the blanket can sit inside a build-up rather than only over a finished surface.
The same roll damps vibration as well as heat and sound, which is why it is also used where machinery and ductwork transmit movement into a structure.
Values the product page states are listed in the middle column. Where the page publishes no figure, the value belongs in the request column and is confirmed on your quotation rather than estimated here.
| Item | Published on the product page | Available on request |
|---|---|---|
| Material | Stable glass fiber bonded with thermosetting resins | Not applicable |
| Surface | Aluminium foil facing | Not applicable |
| Width | 50 cm standard | Other widths, to be confirmed |
| Laps | 5 cm laps on both sides | Not applicable |
| Fixings | Fixed by punching or nailing to the rafter fascia | Not applicable |
| Format | Roll or blanket material for large-area laying | Roll length, to be confirmed |
| Thickness | Not published | To be confirmed on your quotation |
| Density | Not published | To be confirmed on your quotation |
| Thermal conductivity or R-value | Not published | To be confirmed on your quotation |
| Fire rating | Not published | To be confirmed on your quotation |
The foil facing does two jobs: it reflects radiant heat and acts as a vapour retarder. The product page states that since the blanket already has foil, there is no need to use a separate vapour barrier.
Short field notes taken from the product page, so the roll is laid the way the material was specified.
Keep adjacent product options together for a faster catalog comparison.
Moisture-resistant PVC fabric for industrial ducting. Professional grade material compatible with canvas duct connect sheet for durable HVAC system integration.
View product
Fully customizable OEM solutions for high-performance TDC flange systems. Contact our HVAC flange supplier team for precision-engineered spiral duct flange components built to your exact industrial…
View product
Direct factory wholesale for bulk orders of high-grade spiral duct flange components. We act as your reliable hvac flange supplier for durable, airtight ventilation solutions.
View productit is supplied in roll format for large-area laying, combining thermal control with vibration damping and sound absorption in one flexible roll. the work is duct, roof and industrial insulation rather than small cut pieces.
each batch is built from stable glass fiber bonded with thermosetting resins and faced with aluminium foil. that construction keeps the roll flexible enough to lay over large areas while still holding its shape.
roll width, lap edges and packing are the three points the supplier confirms with contractors, hvac integrators and facility teams. settling them before dispatch avoids rolls that do not fit the framing they were ordered for.
the foil facing goes on the correct side of the assembly, which is decided by the build-up it sits in, because a roof deck and a duct run do not set it the same way. roll width and lap edges are then matched to the framing.
duct insulation selection starts with keeping the duct surface above the dew point, sealing the vapour barrier and containing mechanical-room noise. the foil facing and the lap detail are part of that, not an afterthought.
send the roll width, the total area, the packing you need and the destination. for container orders the manufacturer-side view covers roll length, lap edges, packing, loading counts and the documents that travel with the shipment.
